tensorcircuit.densitymatrix#
Quantum circuit class but with density matrix simulator
- class tensorcircuit.densitymatrix.DMCircuit(nqubits: int, empty: bool = False, inputs: Optional[Any] = None, mps_inputs: Optional[tensorcircuit.quantum.QuOperator] = None, dminputs: Optional[Any] = None, mpo_dminputs: Optional[tensorcircuit.quantum.QuOperator] = None, split: Optional[Dict[str, Any]] = None)[源代码]#
基类:
tensorcircuit.basecircuit.BaseCircuit
- ANY(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CNOT(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- CPHASE(*index: int, **vars: Any) None #
Apply CPHASE gate with parameters on the circuit. See
tensorcircuit.gates.cphase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CR(*index: int, **vars: Any) None #
Apply CR gate with parameters on the circuit. See
tensorcircuit.gates.cr_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRX(*index: int, **vars: Any) None #
Apply CRX gate with parameters on the circuit. See
tensorcircuit.gates.crx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRY(*index: int, **vars: Any) None #
Apply CRY gate with parameters on the circuit. See
tensorcircuit.gates.cry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRZ(*index: int, **vars: Any) None #
Apply CRZ gate with parameters on the circuit. See
tensorcircuit.gates.crz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CU(*index: int, **vars: Any) None #
Apply CU gate with parameters on the circuit. See
tensorcircuit.gates.cu_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CY(*index: int, **kws: Any) None #
Apply CY gate on the circuit. See
tensorcircuit.gates.cy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.-1.j\\ 0.+0.j & 0.+0.j & 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- CZ(*index: int, **kws: Any) None #
Apply CZ gate on the circuit. See
tensorcircuit.gates.cz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- EXP(*index: int, **vars: Any) None #
Apply EXP gate with parameters on the circuit. See
tensorcircuit.gates.exp_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- EXP1(*index: int, **vars: Any) None #
Apply EXP1 gate with parameters on the circuit. See
tensorcircuit.gates.exp1_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- FREDKIN(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- H(*index: int, **kws: Any) None #
Apply H gate on the circuit. See
tensorcircuit.gates.h_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & 0.70710677+0.j\\ 0.70710677+0.j & -0.70710677+0.j \end{bmatrix}\end{split}\]
- I(*index: int, **kws: Any) None #
Apply I gate on the circuit. See
tensorcircuit.gates.i_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- ISWAP(*index: int, **vars: Any) None #
Apply ISWAP gate with parameters on the circuit. See
tensorcircuit.gates.iswap_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- MPO(*index: int, **vars: Any) None #
Apply mpo gate in MPO format on the circuit. See
tensorcircuit.gates.mpo_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- MULTICONTROL(*index: int, **vars: Any) None #
Apply multicontrol gate in MPO format on the circuit. See
tensorcircuit.gates.multicontrol_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORX(*index: int, **vars: Any) None #
Apply ORX gate with parameters on the circuit. See
tensorcircuit.gates.orx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORY(*index: int, **vars: Any) None #
Apply ORY gate with parameters on the circuit. See
tensorcircuit.gates.ory_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORZ(*index: int, **vars: Any) None #
Apply ORZ gate with parameters on the circuit. See
tensorcircuit.gates.orz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- OX(*index: int, **kws: Any) None #
Apply OX gate on the circuit. See
tensorcircuit.gates.ox_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- OY(*index: int, **kws: Any) None #
Apply OY gate on the circuit. See
tensorcircuit.gates.oy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j & 0.+0.j & 0.+0.j\\ 0.+1.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- OZ(*index: int, **kws: Any) None #
Apply OZ gate on the circuit. See
tensorcircuit.gates.oz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- PHASE(*index: int, **vars: Any) None #
Apply PHASE gate with parameters on the circuit. See
tensorcircuit.gates.phase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- R(*index: int, **vars: Any) None #
Apply R gate with parameters on the circuit. See
tensorcircuit.gates.r_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RX(*index: int, **vars: Any) None #
Apply RX gate with parameters on the circuit. See
tensorcircuit.gates.rx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RXX(*index: int, **vars: Any) None #
Apply RXX gate with parameters on the circuit. See
tensorcircuit.gates.rxx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RY(*index: int, **vars: Any) None #
Apply RY gate with parameters on the circuit. See
tensorcircuit.gates.ry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RYY(*index: int, **vars: Any) None #
Apply RYY gate with parameters on the circuit. See
tensorcircuit.gates.ryy_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RZ(*index: int, **vars: Any) None #
Apply RZ gate with parameters on the circuit. See
tensorcircuit.gates.rz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RZZ(*index: int, **vars: Any) None #
Apply RZZ gate with parameters on the circuit. See
tensorcircuit.gates.rzz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- S(*index: int, **kws: Any) None #
Apply S gate on the circuit. See
tensorcircuit.gates.s_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+1.j \end{bmatrix}\end{split}\]
- SD(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- SWAP(*index: int, **kws: Any) None #
Apply SWAP gate on the circuit. See
tensorcircuit.gates.swap_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- T(*index: int, **kws: Any) None #
Apply T gate on the circuit. See
tensorcircuit.gates.t_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677+0.70710677j \end{bmatrix}\end{split}\]
- TD(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- TOFFOLI(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- U(*index: int, **vars: Any) None #
Apply U gate with parameters on the circuit. See
tensorcircuit.gates.u_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- WROOT(*index: int, **kws: Any) None #
Apply WROOT gate on the circuit. See
tensorcircuit.gates.wroot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & -0.5 & -0.5j\\ 0.5 & -0.5j & 0.70710677+0.j \end{bmatrix}\end{split}\]
- X(*index: int, **kws: Any) None #
Apply X gate on the circuit. See
tensorcircuit.gates.x_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j\\ 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- Y(*index: int, **kws: Any) None #
Apply Y gate on the circuit. See
tensorcircuit.gates.y_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j\\ 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- Z(*index: int, **kws: Any) None #
Apply Z gate on the circuit. See
tensorcircuit.gates.z_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- __init__(nqubits: int, empty: bool = False, inputs: Optional[Any] = None, mps_inputs: Optional[tensorcircuit.quantum.QuOperator] = None, dminputs: Optional[Any] = None, mpo_dminputs: Optional[tensorcircuit.quantum.QuOperator] = None, split: Optional[Dict[str, Any]] = None) None [源代码]#
The density matrix simulator based on tensornetwork engine.
- 参数
nqubits (int) -- Number of qubits
empty (bool, optional) -- if True, nothing initialized, only for internal use, defaults to False
inputs (Optional[Tensor], optional) -- the state input for the circuit, defaults to None
mps_inputs (Optional[QuOperator]) -- QuVector for a MPS like initial pure state.
dminputs (Optional[Tensor], optional) -- the density matrix input for the circuit, defaults to None
mpo_dminputs (Optional[QuOperator]) -- QuOperator for a MPO like initial density matrix.
split (Optional[Dict[str, Any]]) -- dict if two qubit gate is ready for split, including parameters for at least one of
max_singular_values
andmax_truncation_err
.
- static all_zero_nodes(n: int, d: int = 2, prefix: str = 'qb-') List[tensornetwork.network_components.Node] #
- amplitude(l: Union[str, Any]) Any #
Returns the amplitude of the circuit given the bitstring l. For state simulator, it computes \(\langle l\vert \psi\rangle\), for density matrix simulator, it computes \(Tr(\rho \vert l\rangle \langle 1\vert)\) Note how these two are different up to a square operation.
- Example
>>> c = tc.Circuit(2) >>> c.X(0) >>> c.amplitude("10") array(1.+0.j, dtype=complex64) >>> c.CNOT(0, 1) >>> c.amplitude("11") array(1.+0.j, dtype=complex64)
- 参数
l (Union[str, Tensor]) -- The bitstring of 0 and 1s.
- 返回
The amplitude of the circuit.
- 返回类型
tn.Node.tensor
- amplitudedamping(*index: int, **vars: float) None #
Apply amplitudedamping quantum channel on the circuit. See
tensorcircuit.channels.amplitudedampingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- any(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- append(c: tensorcircuit.abstractcircuit.AbstractCircuit, indices: Optional[List[int]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
append circuit
c
before- Example
>>> c1 = tc.Circuit(2) >>> c1.H(0) >>> c1.H(1) >>> c2 = tc.Circuit(2) >>> c2.cnot(0, 1) >>> c1.append(c2) <tensorcircuit.circuit.Circuit object at 0x7f8402968970> >>> c1.draw() ┌───┐ q_0:┤ H ├──■── ├───┤┌─┴─┐ q_1:┤ H ├┤ X ├ └───┘└───┘
- 参数
c (BaseCircuit) -- The other circuit to be appended
indices (Optional[List[int]], optional) -- the qubit indices to which
c
is appended on. Defaults to None, which means plain concatenation.
- 返回
The composed circuit
- 返回类型
- append_from_qir(qir: List[Dict[str, Any]]) None #
Apply the ciurict in form of quantum intermediate representation after the current cirucit.
- Example
>>> c = tc.Circuit(3) >>> c.H(0) >>> c.to_qir() [{'gatef': h, 'gate': Gate(...), 'index': (0,), 'name': 'h', 'split': None, 'mpo': False}] >>> c2 = tc.Circuit(3) >>> c2.CNOT(0, 1) >>> c2.to_qir() [{'gatef': cnot, 'gate': Gate(...), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}] >>> c.append_from_qir(c2.to_qir()) >>> c.to_qir() [{'gatef': h, 'gate': Gate(...), 'index': (0,), 'name': 'h', 'split': None, 'mpo': False}, {'gatef': cnot, 'gate': Gate(...), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}]
- 参数
qir (List[Dict[str, Any]]) -- The quantum intermediate representation.
- apply(gate: Union[tensorcircuit.gates.Gate, tensorcircuit.quantum.QuOperator], *index: int, name: Optional[str] = None, split: Optional[Dict[str, Any]] = None, mpo: bool = False, ir_dict: Optional[Dict[str, Any]] = None) None #
An implementation of this method should also append gate directionary to self._qir
- apply_general_gate(gate: Union[tensorcircuit.gates.Gate, tensorcircuit.quantum.QuOperator], *index: int, name: Optional[str] = None, split: Optional[Dict[str, Any]] = None, mpo: bool = False, ir_dict: Optional[Dict[str, Any]] = None) None #
An implementation of this method should also append gate directionary to self._qir
- static apply_general_gate_delayed(gatef: Callable[[], tensorcircuit.gates.Gate], name: Optional[str] = None, mpo: bool = False) Callable[[...], None] #
- apply_general_kraus(kraus: Sequence[tensorcircuit.gates.Gate], index: Sequence[Tuple[int, ...]], **kws: Any) None [源代码]#
- static apply_general_kraus_delayed(krausf: Callable[[...], Sequence[tensorcircuit.gates.Gate]]) Callable[[...], None] [源代码]#
- static apply_general_variable_gate_delayed(gatef: Callable[[...], tensorcircuit.gates.Gate], name: Optional[str] = None, mpo: bool = False) Callable[[...], None] #
- barrier_instruction(*index: List[int]) None #
add a barrier instruction flag, no effect on numerical simulation
- 参数
index (List[int]) -- the corresponding qubits
- ccnot(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- ccx(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- static check_kraus(kraus: Sequence[tensorcircuit.gates.Gate]) bool [源代码]#
- circuit_param: Dict[str, Any]#
- cnot(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- static coloring_copied_nodes(nodes: Sequence[tensornetwork.network_components.Node], nodes0: Sequence[tensornetwork.network_components.Node], is_dagger: bool = True, flag: str = 'inputs') None #
- static coloring_nodes(nodes: Sequence[tensornetwork.network_components.Node], is_dagger: bool = False, flag: str = 'inputs') None #
- cond_measure(index: int, status: Optional[float] = None) Any #
Measurement on z basis at
index
qubit based on quantum amplitude (not post-selection). The highlight is that this method can return the measured result as a int Tensor and thus maintained a jittable pipeline.- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> r = c.cond_measurement(0) >>> c.conditional_gate(r, [tc.gates.i(), tc.gates.x()], 1) >>> c.expectation([tc.gates.z(), [0]]), c.expectation([tc.gates.z(), [1]]) # two possible outputs: (1, 1) or (-1, -1)
注解
In terms of
DMCircuit
, this method returns nothing and the density matrix after this method is kept in mixed state without knowing the measuremet resuslts- 参数
index (int) -- the qubit for the z-basis measurement
- 返回
0 or 1 for z measurement on up and down freedom
- 返回类型
Tensor
- cond_measurement(index: int, status: Optional[float] = None) Any #
Measurement on z basis at
index
qubit based on quantum amplitude (not post-selection). The highlight is that this method can return the measured result as a int Tensor and thus maintained a jittable pipeline.- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> r = c.cond_measurement(0) >>> c.conditional_gate(r, [tc.gates.i(), tc.gates.x()], 1) >>> c.expectation([tc.gates.z(), [0]]), c.expectation([tc.gates.z(), [1]]) # two possible outputs: (1, 1) or (-1, -1)
注解
In terms of
DMCircuit
, this method returns nothing and the density matrix after this method is kept in mixed state without knowing the measuremet resuslts- 参数
index (int) -- the qubit for the z-basis measurement
- 返回
0 or 1 for z measurement on up and down freedom
- 返回类型
Tensor
- conditional_gate(which: Any, kraus: Sequence[tensorcircuit.gates.Gate], *index: int) None #
Apply
which
-th gate fromkraus
list, i.e. apply kraus[which]- 参数
which (Tensor) -- Tensor of shape [] and dtype int
kraus (Sequence[Gate]) -- A list of gate in the form of
tc.gate
or Tensorindex (int) -- the qubit lines the gate applied on
- static copy_nodes(nodes: Sequence[tensornetwork.network_components.Node], dangling: Optional[Sequence[tensornetwork.network_components.Edge]] = None, conj: Optional[bool] = False) Tuple[List[tensornetwork.network_components.Node], List[tensornetwork.network_components.Edge]] #
copy all nodes and dangling edges correspondingly
- 返回
- cphase(*index: int, **vars: Any) None #
Apply CPHASE gate with parameters on the circuit. See
tensorcircuit.gates.cphase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cr(*index: int, **vars: Any) None #
Apply CR gate with parameters on the circuit. See
tensorcircuit.gates.cr_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- crx(*index: int, **vars: Any) None #
Apply CRX gate with parameters on the circuit. See
tensorcircuit.gates.crx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cry(*index: int, **vars: Any) None #
Apply CRY gate with parameters on the circuit. See
tensorcircuit.gates.cry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- crz(*index: int, **vars: Any) None #
Apply CRZ gate with parameters on the circuit. See
tensorcircuit.gates.crz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cswap(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- cu(*index: int, **vars: Any) None #
Apply CU gate with parameters on the circuit. See
tensorcircuit.gates.cu_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cx(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- cy(*index: int, **kws: Any) None #
Apply CY gate on the circuit. See
tensorcircuit.gates.cy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.-1.j\\ 0.+0.j & 0.+0.j & 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- cz(*index: int, **kws: Any) None #
Apply CZ gate on the circuit. See
tensorcircuit.gates.cz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- densitymatrix(check: bool = False, reuse: bool = True) Any [源代码]#
Return the output density matrix of the circuit.
- 参数
check (bool, optional) -- check whether the final return is a legal density matrix, defaults to False
reuse (bool, optional) -- whether to reuse previous results, defaults to True
- 返回
The output densitymatrix in 2D shape tensor form
- 返回类型
Tensor
- depolarizing(*index: int, **vars: float) None #
Apply depolarizing quantum channel on the circuit. See
tensorcircuit.channels.depolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- draw(**kws: Any) Any #
Visualise the circuit. This method recevies the keywords as same as qiskit.circuit.QuantumCircuit.draw. More details can be found here: https://qiskit.org/documentation/stubs/qiskit.circuit.QuantumCircuit.draw.html. Interesting kws options include: ``idle_wires``(bool)
- Example
>>> c = tc.Circuit(3) >>> c.H(1) >>> c.X(2) >>> c.CNOT(0, 1) >>> c.draw(output='text') q_0: ───────■── ┌───┐┌─┴─┐ q_1: ┤ H ├┤ X ├ ├───┤└───┘ q_2: ┤ X ├───── └───┘
- exp(*index: int, **vars: Any) None #
Apply EXP gate with parameters on the circuit. See
tensorcircuit.gates.exp_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- exp1(*index: int, **vars: Any) None #
Apply EXP1 gate with parameters on the circuit. See
tensorcircuit.gates.exp1_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- expectation(*ops: Tuple[tensornetwork.network_components.Node, List[int]], reuse: bool = True, noise_conf: Optional[Any] = None, status: Optional[Any] = None, **kws: Any) <property object at 0x7fc0b4f1ff90> [源代码]#
Compute the expectation of corresponding operators.
- 参数
ops (Tuple[tn.Node, List[int]]) -- Operator and its position on the circuit, eg.
(tc.gates.z(), [1, ]), (tc.gates.x(), [2, ])
is for operator \(Z_1X_2\).reuse (bool) -- whether contract the density matrix in advance, defaults to True
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
status (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
Tensor with one element
- 返回类型
Tensor
- expectation_before(*ops: Tuple[tensornetwork.network_components.Node, List[int]], reuse: bool = True, **kws: Any) List[tensornetwork.network_components.Node] #
Get the tensor network in the form of a list of nodes for the expectation calculation before the real contraction
- 参数
reuse (bool, optional) -- _description_, defaults to True
- 引发
ValueError -- _description_
- 返回
_description_
- 返回类型
List[tn.Node]
- expectation_ps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, ps: Optional[Sequence[int]] = None, reuse: bool = True, noise_conf: Optional[Any] = None, nmc: int = 1000, status: Optional[Any] = None, **kws: Any) Any #
Shortcut for Pauli string expectation. x, y, z list are for X, Y, Z positions
- Example
>>> c = tc.Circuit(2) >>> c.X(0) >>> c.H(1) >>> c.expectation_ps(x=[1], z=[0]) array(-0.99999994+0.j, dtype=complex64)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> c.expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) (0.46274087-3.764033e-09j)
- 参数
x (Optional[Sequence[int]], optional) -- sites to apply X gate, defaults to None
y (Optional[Sequence[int]], optional) -- sites to apply Y gate, defaults to None
z (Optional[Sequence[int]], optional) -- sites to apply Z gate, defaults to None
ps (Optional[Sequence[int]], optional) -- or one can apply a ps structures instead of
x
,y
,z
, e.g. [0, 1, 3, 0, 2, 2] for X_1Z_2Y_4Y_5 defaults to None,ps
can overwritex
,y
andz
reuse (bool, optional) -- whether to cache and reuse the wavefunction, defaults to True
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
status (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
Expectation value
- 返回类型
Tensor
- fredkin(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- classmethod from_json(jsonstr: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
load json str as a Circuit
- 参数
jsonstr (str) -- _description_
circuit_params (Optional[Dict[str, Any]], optional) -- Extra circuit parameters in the format of
__init__
, defaults to None
- 返回
_description_
- 返回类型
- classmethod from_json_file(file: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
load json file and convert it to a circuit
- 参数
file (str) -- filename
circuit_params (Optional[Dict[str, Any]], optional) -- _description_, defaults to None
- 返回
_description_
- 返回类型
- classmethod from_openqasm(qasmstr: str, circuit_params: Optional[Dict[str, Any]] = None, keep_measure_order: bool = False) tensorcircuit.abstractcircuit.AbstractCircuit #
- classmethod from_openqasm_file(file: str, circuit_params: Optional[Dict[str, Any]] = None, keep_measure_order: bool = False) tensorcircuit.abstractcircuit.AbstractCircuit #
- classmethod from_qir(qir: List[Dict[str, Any]], circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
Restore the circuit from the quantum intermediate representation.
- Example
>>> c = tc.Circuit(3) >>> c.H(0) >>> c.rx(1, theta=tc.array_to_tensor(0.7)) >>> c.exp1(0, 1, unitary=tc.gates._zz_matrix, theta=tc.array_to_tensor(-0.2), split=split) >>> len(c) 7 >>> c.expectation((tc.gates.z(), [1])) array(0.764842+0.j, dtype=complex64) >>> qirs = c.to_qir() >>> >>> c = tc.Circuit.from_qir(qirs, circuit_params={"nqubits": 3}) >>> len(c._nodes) 7 >>> c.expectation((tc.gates.z(), [1])) array(0.764842+0.j, dtype=complex64)
- 参数
qir (List[Dict[str, Any]]) -- The quantum intermediate representation of a circuit.
circuit_params (Optional[Dict[str, Any]]) -- Extra circuit parameters.
- 返回
The circuit have same gates in the qir.
- 返回类型
- classmethod from_qiskit(qc: Any, n: Optional[int] = None, inputs: Optional[List[float]] = None, circuit_params: Optional[Dict[str, Any]] = None, binding_params: Optional[Union[Sequence[float], Dict[Any, float]]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
Import Qiskit QuantumCircuit object as a
tc.Circuit
object.- Example
>>> from qiskit import QuantumCircuit >>> qisc = QuantumCircuit(3) >>> qisc.h(2) >>> qisc.cswap(1, 2, 0) >>> qisc.swap(0, 1) >>> c = tc.Circuit.from_qiskit(qisc)
- 参数
qc (QuantumCircuit in Qiskit) -- Qiskit Circuit object
n (int) -- The number of qubits for the circuit
inputs (Optional[List[float]], optional) -- possible input wavefunction for
tc.Circuit
, defaults to Nonecircuit_params (Optional[Dict[str, Any]]) -- kwargs given in Circuit.__init__ construction function, default to None.
binding_params (Optional[Union[Sequence[float], Dict[Any, float]]]) -- (variational) parameters for the circuit. Could be either a sequence or dictionary depending on the type of parameters in the Qiskit circuit. For
ParameterVectorElement
use sequence. ForParameter
use dictionary
- 返回
The same circuit but as tensorcircuit object
- 返回类型
- classmethod from_qsim_file(file: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
- static front_from_nodes(nodes: List[tensornetwork.network_components.Node]) List[tensornetwork.network_components.Edge] #
- gate_aliases = [['cnot', 'cx'], ['fredkin', 'cswap'], ['toffoli', 'ccnot'], ['toffoli', 'ccx'], ['any', 'unitary'], ['sd', 'sdg'], ['td', 'tdg']]#
- gate_count(gate_list: Optional[Union[str, Sequence[str]]] = None) int #
count the gate number of the circuit
- Example
>>> c = tc.Circuit(3) >>> c.h(0) >>> c.multicontrol(0, 1, 2, ctrl=[0, 1], unitary=tc.gates._x_matrix) >>> c.toffolli(1, 2, 0) >>> c.gate_count() 3 >>> c.gate_count(["multicontrol", "toffoli"]) 2
- 参数
gate_list (Optional[Sequence[str]], optional) -- gate name or gate name list to be counted, defaults to None (counting all gates)
- 返回
the total number of all gates or gates in the
gate_list
- 返回类型
int
- gate_count_by_condition(cond_func: Callable[[Dict[str, Any]], bool]) int #
count the number of gates that satisfy certain condition
- Example
>>> c = tc.Circuit(3) >>> c.x(0) >>> c.h(0) >>> c.multicontrol(0, 1, 2, ctrl=[0, 1], unitary=tc.gates._x_matrix) >>> c.gate_count_by_condition(lambda qir: qir["index"] == (0, )) 2 >>> c.gate_count_by_condition(lambda qir: qir["mpo"]) 1
- 参数
cond_func (Callable[[Dict[str, Any]], bool]) -- the condition for counting the gate
- 返回
the total number of all gates which satisfy the
condition
- 返回类型
int
- gate_summary() Dict[str, int] #
return the summary dictionary on gate type - gate count pair
- 返回
the gate count dict by gate type
- 返回类型
Dict[str, int]
- general_kraus(kraus: Sequence[tensorcircuit.gates.Gate], index: Sequence[Tuple[int, ...]], **kws: Any) None #
- generaldepolarizing(*index: int, **vars: float) None #
Apply generaldepolarizing quantum channel on the circuit. See
tensorcircuit.channels.generaldepolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- get_dm_as_quoperator() tensorcircuit.quantum.QuOperator [源代码]#
Get the representation of the output state in the form of
QuOperator
while maintaining the circuit uncomputed- 返回
QuOperator
representation of the output state from the circuit- 返回类型
- get_dm_as_quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- get_positional_logical_mapping() Dict[int, int] #
Get positional logical mapping dict based on measure instruction. This function is useful when we only measure part of the qubits in the circuit, to process the count result from partial measurement, we must be aware of the mapping, i.e. for each position in the count bitstring, what is the corresponding qubits (logical) defined on the circuit
- 返回
positional_logical_mapping
- 返回类型
Dict[int, int]
- get_quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- h(*index: int, **kws: Any) None #
Apply H gate on the circuit. See
tensorcircuit.gates.h_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & 0.70710677+0.j\\ 0.70710677+0.j & -0.70710677+0.j \end{bmatrix}\end{split}\]
- i(*index: int, **kws: Any) None #
Apply I gate on the circuit. See
tensorcircuit.gates.i_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- initial_mapping(logical_physical_mapping: Dict[int, int], n: Optional[int] = None, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
generate a new circuit with the qubit mapping given by
logical_physical_mapping
- 参数
logical_physical_mapping (Dict[int, int]) -- how to map logical qubits to the physical qubits on the new circuit
n (Optional[int], optional) -- number of qubit of the new circuit, can be different from the original one, defaults to None
circuit_params (Optional[Dict[str, Any]], optional) -- _description_, defaults to None
- 返回
_description_
- 返回类型
- inputs: Any#
- inverse(circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
inverse the circuit, return a new inversed circuit
- EXAMPLE
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rzz(1, 2, theta=0.8) >>> c1 = c.inverse()
- 参数
circuit_params (Optional[Dict[str, Any]], optional) -- keywords dict for initialization the new circuit, defaults to None
- 返回
the inversed circuit
- 返回类型
- is_dm: bool = True#
- is_mps: bool = False#
- isotropicdepolarizing(*index: int, **vars: float) None #
Apply isotropicdepolarizing quantum channel on the circuit. See
tensorcircuit.channels.isotropicdepolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- iswap(*index: int, **vars: Any) None #
Apply ISWAP gate with parameters on the circuit. See
tensorcircuit.gates.iswap_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- measure(*index: int, with_prob: bool = False, status: Optional[Any] = None) Tuple[Any, Any] #
Take measurement to the given quantum lines. This method is jittable is and about 100 times faster than unjit version!
- 参数
index (int) -- Measure on which quantum line.
with_prob (bool, optional) -- If true, theoretical probability is also returned.
status (Optional[Tensor]) -- external randomness, with shape [index], defaults to None
- 返回
The sample output and probability (optional) of the quantum line.
- 返回类型
Tuple[Tensor, Tensor]
- measure_instruction(*index: int) None #
add a measurement instruction flag, no effect on numerical simulation
- 参数
index (int) -- the corresponding qubits
- measure_jit(*index: int, with_prob: bool = False, status: Optional[Any] = None) Tuple[Any, Any] #
Take measurement to the given quantum lines. This method is jittable is and about 100 times faster than unjit version!
- 参数
index (int) -- Measure on which quantum line.
with_prob (bool, optional) -- If true, theoretical probability is also returned.
status (Optional[Tensor]) -- external randomness, with shape [index], defaults to None
- 返回
The sample output and probability (optional) of the quantum line.
- 返回类型
Tuple[Tensor, Tensor]
- mpo(*index: int, **vars: Any) None #
Apply mpo gate in MPO format on the circuit. See
tensorcircuit.gates.mpo_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- mpogates = ['multicontrol', 'mpo']#
- multicontrol(*index: int, **vars: Any) None #
Apply multicontrol gate in MPO format on the circuit. See
tensorcircuit.gates.multicontrol_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- orx(*index: int, **vars: Any) None #
Apply ORX gate with parameters on the circuit. See
tensorcircuit.gates.orx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ory(*index: int, **vars: Any) None #
Apply ORY gate with parameters on the circuit. See
tensorcircuit.gates.ory_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- orz(*index: int, **vars: Any) None #
Apply ORZ gate with parameters on the circuit. See
tensorcircuit.gates.orz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ox(*index: int, **kws: Any) None #
Apply OX gate on the circuit. See
tensorcircuit.gates.ox_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- oy(*index: int, **kws: Any) None #
Apply OY gate on the circuit. See
tensorcircuit.gates.oy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j & 0.+0.j & 0.+0.j\\ 0.+1.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- oz(*index: int, **kws: Any) None #
Apply OZ gate on the circuit. See
tensorcircuit.gates.oz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- perfect_sampling(status: Optional[Any] = None) Tuple[str, float] #
Sampling bistrings from the circuit output based on quantum amplitudes. Reference: arXiv:1201.3974.
- 参数
status (Optional[Tensor]) -- external randomness, with shape [nqubits], defaults to None
- 返回
Sampled bit string and the corresponding theoretical probability.
- 返回类型
Tuple[str, float]
- phase(*index: int, **vars: Any) None #
Apply PHASE gate with parameters on the circuit. See
tensorcircuit.gates.phase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- phasedamping(*index: int, **vars: float) None #
Apply phasedamping quantum channel on the circuit. See
tensorcircuit.channels.phasedampingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- prepend(c: tensorcircuit.abstractcircuit.AbstractCircuit) tensorcircuit.abstractcircuit.AbstractCircuit #
prepend circuit
c
before- 参数
c (BaseCircuit) -- The other circuit to be prepended
- 返回
The composed circuit
- 返回类型
- probability() Any #
get the 2^n length probability vector over computational basis
- 返回
probability vector
- 返回类型
Tensor
- quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- r(*index: int, **vars: Any) None #
Apply R gate with parameters on the circuit. See
tensorcircuit.gates.r_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- readouterror_bs(readout_error: Optional[Sequence[Any]] = None, p: Optional[Any] = None) Any #
Apply readout error to original probabilities of bit string and return the noisy probabilities.
- Example
>>> readout_error = [] >>> readout_error.append([0.9,0.75]) # readout error for qubit 0, [p0|0,p1|1] >>> readout_error.append([0.4,0.7]) # readout error for qubit 1, [p0|0,p1|1]
- 参数
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- list of readout error for each qubits.
p (Optional[Any]) -- probabilities of bit string
- 返回类型
Tensor
- replace_inputs(inputs: Any) None #
Replace the input state with the circuit structure unchanged.
- 参数
inputs (Tensor) -- Input wavefunction.
- reset(*index: int, **vars: float) None #
Apply reset quantum channel on the circuit. See
tensorcircuit.channels.resetchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- reset_instruction(*index: int) None #
add a reset instruction flag, no effect on numerical simulation
- 参数
index (int) -- the corresponding qubits
- rx(*index: int, **vars: Any) None #
Apply RX gate with parameters on the circuit. See
tensorcircuit.gates.rx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rxx(*index: int, **vars: Any) None #
Apply RXX gate with parameters on the circuit. See
tensorcircuit.gates.rxx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ry(*index: int, **vars: Any) None #
Apply RY gate with parameters on the circuit. See
tensorcircuit.gates.ry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ryy(*index: int, **vars: Any) None #
Apply RYY gate with parameters on the circuit. See
tensorcircuit.gates.ryy_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rz(*index: int, **vars: Any) None #
Apply RZ gate with parameters on the circuit. See
tensorcircuit.gates.rz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rzz(*index: int, **vars: Any) None #
Apply RZZ gate with parameters on the circuit. See
tensorcircuit.gates.rzz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- s(*index: int, **kws: Any) None #
Apply S gate on the circuit. See
tensorcircuit.gates.s_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+1.j \end{bmatrix}\end{split}\]
- sample(batch: Optional[int] = None, allow_state: bool = False, readout_error: Optional[Sequence[Any]] = None, format: Optional[str] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None) Any #
batched sampling from state or circuit tensor network directly
- 参数
batch (Optional[int], optional) -- number of samples, defaults to None
allow_state (bool, optional) -- if true, we sample from the final state if memory allows, True is preferred, defaults to False
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None
format (Optional[str]) -- sample format, defaults to None as backward compatibility check the doc in
tensorcircuit.quantum.measurement_results()
format -- alias for the argument
format
random_generator (Optional[Any], optional) -- random generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
- 返回
List (if batch) of tuple (binary configuration tensor and corresponding probability) if the format is None, and consistent with format when given
- 返回类型
Any
- sample_expectation_ps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, shots: Optional[int] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None, readout_error: Optional[Sequence[Any]] = None, noise_conf: Optional[Any] = None, nmc: int = 1000, statusc: Optional[Any] = None, **kws: Any) Any #
Compute the expectation with given Pauli string with measurement shots numbers
- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rx(1, theta=np.pi/2) >>> c.sample_expectation_ps(x=[0], y=[1]) -0.99999976 >>> readout_error = [] >>> readout_error.append([0.9,0.75]) >>> readout_error.append([0.4,0.7]) >>> c.sample_expectation_ps(x=[0], y=[1],readout_error = readout_error)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> readout_error = [[0.9, 0.75],[0.4, 0.7]] >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> noise_conf.add_noise("readout", readout_error) >>> c.sample_expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) 0.44766843
- 参数
x (Optional[Sequence[int]], optional) -- index for Pauli X, defaults to None
y (Optional[Sequence[int]], optional) -- index for Pauli Y, defaults to None
z (Optional[Sequence[int]], optional) -- index for Pauli Z, defaults to None
shots (Optional[int], optional) -- number of measurement shots, defaults to None, indicating analytical result
random_generator (Optional[Any]) -- random_generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None. Overrided if noise_conf is provided.
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
statusc (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
[description]
- 返回类型
Tensor
- sd(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- sdg(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- select_gate(which: Any, kraus: Sequence[tensorcircuit.gates.Gate], *index: int) None #
Apply
which
-th gate fromkraus
list, i.e. apply kraus[which]- 参数
which (Tensor) -- Tensor of shape [] and dtype int
kraus (Sequence[Gate]) -- A list of gate in the form of
tc.gate
or Tensorindex (int) -- the qubit lines the gate applied on
- sexpps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, shots: Optional[int] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None, readout_error: Optional[Sequence[Any]] = None, noise_conf: Optional[Any] = None, nmc: int = 1000, statusc: Optional[Any] = None, **kws: Any) Any #
Compute the expectation with given Pauli string with measurement shots numbers
- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rx(1, theta=np.pi/2) >>> c.sample_expectation_ps(x=[0], y=[1]) -0.99999976 >>> readout_error = [] >>> readout_error.append([0.9,0.75]) >>> readout_error.append([0.4,0.7]) >>> c.sample_expectation_ps(x=[0], y=[1],readout_error = readout_error)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> readout_error = [[0.9, 0.75],[0.4, 0.7]] >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> noise_conf.add_noise("readout", readout_error) >>> c.sample_expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) 0.44766843
- 参数
x (Optional[Sequence[int]], optional) -- index for Pauli X, defaults to None
y (Optional[Sequence[int]], optional) -- index for Pauli Y, defaults to None
z (Optional[Sequence[int]], optional) -- index for Pauli Z, defaults to None
shots (Optional[int], optional) -- number of measurement shots, defaults to None, indicating analytical result
random_generator (Optional[Any]) -- random_generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None. Overrided if noise_conf is provided.
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
statusc (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
[description]
- 返回类型
Tensor
- sgates = ['i', 'x', 'y', 'z', 'h', 't', 's', 'td', 'sd', 'wroot', 'cnot', 'cz', 'swap', 'cy', 'ox', 'oy', 'oz', 'toffoli', 'fredkin']#
- split: Optional[Dict[str, Any]]#
- static standardize_gate(name: str) str #
standardize the gate name to tc common gate sets
- 参数
name (str) -- non-standard gate name
- 返回
the standard gate name
- 返回类型
str
- state(check: bool = False, reuse: bool = True) Any #
Return the output density matrix of the circuit.
- 参数
check (bool, optional) -- check whether the final return is a legal density matrix, defaults to False
reuse (bool, optional) -- whether to reuse previous results, defaults to True
- 返回
The output densitymatrix in 2D shape tensor form
- 返回类型
Tensor
- swap(*index: int, **kws: Any) None #
Apply SWAP gate on the circuit. See
tensorcircuit.gates.swap_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- t(*index: int, **kws: Any) None #
Apply T gate on the circuit. See
tensorcircuit.gates.t_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677+0.70710677j \end{bmatrix}\end{split}\]
- td(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- tdg(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- tex(**kws: Any) str #
Generate latex string based on quantikz latex package
- 返回
Latex string that can be directly compiled via, e.g. latexit
- 返回类型
str
- thermalrelaxation(*index: int, **vars: float) None #
Apply thermalrelaxation quantum channel on the circuit. See
tensorcircuit.channels.thermalrelaxationchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- to_circuit(circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.circuit.Circuit [源代码]#
convert into state simulator (current implementation ignores all noise channels)
- 参数
circuit_params (Optional[Dict[str, Any]], optional) -- kws to initialize circuit object, defaults to None
- 返回
Circuit with no noise
- 返回类型
- to_cirq(enable_instruction: bool = False) Any #
Translate
tc.Circuit
to a cirq circuit object.- 参数
enable_instruction (bool, defaults to False) -- whether also export measurement and reset instructions
- 返回
A cirq circuit of this circuit.
- to_graphviz(graph: Optional[graphviz.graphs.Graph] = None, include_all_names: bool = False, engine: str = 'neato') graphviz.graphs.Graph #
Not an ideal visualization for quantum circuit, but reserve here as a general approach to show the tensornetwork [Deprecated, use
Circuit.vis_tex
orCircuit.draw
instead]
- to_json(file: Optional[str] = None, simplified: bool = False) Any #
circuit dumps to json
- 参数
file (Optional[str], optional) -- file str to dump the json to, defaults to None, return the json str
simplified (bool) -- If False, keep all info for each gate, defaults to be False. If True, suitable for IO since less information is required
- 返回
None if dumps to file otherwise the json str
- 返回类型
Any
- to_openqasm(**kws: Any) str #
transform circuit to openqasm via qiskit circuit, see https://qiskit.org/documentation/stubs/qiskit.circuit.QuantumCircuit.qasm.html for usage on possible options for
kws
- 返回
circuit representation in openqasm format
- 返回类型
str
- to_qir() List[Dict[str, Any]] #
Return the quantum intermediate representation of the circuit.
- Example
>>> c = tc.Circuit(2) >>> c.CNOT(0, 1) >>> c.to_qir() [{'gatef': cnot, 'gate': Gate( name: 'cnot', tensor: array([[[[1.+0.j, 0.+0.j], [0.+0.j, 0.+0.j]], [[0.+0.j, 1.+0.j], [0.+0.j, 0.+0.j]]], [[[0.+0.j, 0.+0.j], [0.+0.j, 1.+0.j]], [[0.+0.j, 0.+0.j], [1.+0.j, 0.+0.j]]]], dtype=complex64), edges: [ Edge(Dangling Edge)[0], Edge(Dangling Edge)[1], Edge('cnot'[2] -> 'qb-1'[0] ), Edge('cnot'[3] -> 'qb-2'[0] ) ]), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}]
- 返回
The quantum intermediate representation of the circuit.
- 返回类型
List[Dict[str, Any]]
- to_qiskit(enable_instruction: bool = False, enable_inputs: bool = False) Any #
Translate
tc.Circuit
to a qiskit QuantumCircuit object.- 参数
enable_instruction (bool, defaults to False) -- whether also export measurement and reset instructions
enable_inputs (bool, defaults to False) -- whether also export the inputs
- 返回
A qiskit object of this circuit.
- toffoli(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- u(*index: int, **vars: Any) None #
Apply U gate with parameters on the circuit. See
tensorcircuit.gates.u_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- unitary(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- vgates = ['r', 'cr', 'u', 'cu', 'rx', 'ry', 'rz', 'phase', 'rxx', 'ryy', 'rzz', 'cphase', 'crx', 'cry', 'crz', 'orx', 'ory', 'orz', 'iswap', 'any', 'exp', 'exp1']#
- vis_tex(**kws: Any) str #
Generate latex string based on quantikz latex package
- 返回
Latex string that can be directly compiled via, e.g. latexit
- 返回类型
str
- wavefunction() Any [源代码]#
get the wavefunction of outputs, raise error if the final state is not purified [Experimental: the phase factor is not fixed for different backend]
- 返回
wavefunction vector
- 返回类型
Tensor
- wroot(*index: int, **kws: Any) None #
Apply WROOT gate on the circuit. See
tensorcircuit.gates.wroot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & -0.5 & -0.5j\\ 0.5 & -0.5j & 0.70710677+0.j \end{bmatrix}\end{split}\]
- x(*index: int, **kws: Any) None #
Apply X gate on the circuit. See
tensorcircuit.gates.x_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j\\ 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- y(*index: int, **kws: Any) None #
Apply Y gate on the circuit. See
tensorcircuit.gates.y_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j\\ 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- z(*index: int, **kws: Any) None #
Apply Z gate on the circuit. See
tensorcircuit.gates.z_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- class tensorcircuit.densitymatrix.DMCircuit2(nqubits: int, empty: bool = False, inputs: Optional[Any] = None, mps_inputs: Optional[tensorcircuit.quantum.QuOperator] = None, dminputs: Optional[Any] = None, mpo_dminputs: Optional[tensorcircuit.quantum.QuOperator] = None, split: Optional[Dict[str, Any]] = None)[源代码]#
基类:
tensorcircuit.densitymatrix.DMCircuit
- ANY(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CNOT(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- CPHASE(*index: int, **vars: Any) None #
Apply CPHASE gate with parameters on the circuit. See
tensorcircuit.gates.cphase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CR(*index: int, **vars: Any) None #
Apply CR gate with parameters on the circuit. See
tensorcircuit.gates.cr_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRX(*index: int, **vars: Any) None #
Apply CRX gate with parameters on the circuit. See
tensorcircuit.gates.crx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRY(*index: int, **vars: Any) None #
Apply CRY gate with parameters on the circuit. See
tensorcircuit.gates.cry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CRZ(*index: int, **vars: Any) None #
Apply CRZ gate with parameters on the circuit. See
tensorcircuit.gates.crz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CU(*index: int, **vars: Any) None #
Apply CU gate with parameters on the circuit. See
tensorcircuit.gates.cu_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- CY(*index: int, **kws: Any) None #
Apply CY gate on the circuit. See
tensorcircuit.gates.cy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.-1.j\\ 0.+0.j & 0.+0.j & 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- CZ(*index: int, **kws: Any) None #
Apply CZ gate on the circuit. See
tensorcircuit.gates.cz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- EXP(*index: int, **vars: Any) None #
Apply EXP gate with parameters on the circuit. See
tensorcircuit.gates.exp_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- EXP1(*index: int, **vars: Any) None #
Apply EXP1 gate with parameters on the circuit. See
tensorcircuit.gates.exp1_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- FREDKIN(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- H(*index: int, **kws: Any) None #
Apply H gate on the circuit. See
tensorcircuit.gates.h_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & 0.70710677+0.j\\ 0.70710677+0.j & -0.70710677+0.j \end{bmatrix}\end{split}\]
- I(*index: int, **kws: Any) None #
Apply I gate on the circuit. See
tensorcircuit.gates.i_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- ISWAP(*index: int, **vars: Any) None #
Apply ISWAP gate with parameters on the circuit. See
tensorcircuit.gates.iswap_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- MPO(*index: int, **vars: Any) None #
Apply mpo gate in MPO format on the circuit. See
tensorcircuit.gates.mpo_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- MULTICONTROL(*index: int, **vars: Any) None #
Apply multicontrol gate in MPO format on the circuit. See
tensorcircuit.gates.multicontrol_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORX(*index: int, **vars: Any) None #
Apply ORX gate with parameters on the circuit. See
tensorcircuit.gates.orx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORY(*index: int, **vars: Any) None #
Apply ORY gate with parameters on the circuit. See
tensorcircuit.gates.ory_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ORZ(*index: int, **vars: Any) None #
Apply ORZ gate with parameters on the circuit. See
tensorcircuit.gates.orz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- OX(*index: int, **kws: Any) None #
Apply OX gate on the circuit. See
tensorcircuit.gates.ox_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- OY(*index: int, **kws: Any) None #
Apply OY gate on the circuit. See
tensorcircuit.gates.oy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j & 0.+0.j & 0.+0.j\\ 0.+1.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- OZ(*index: int, **kws: Any) None #
Apply OZ gate on the circuit. See
tensorcircuit.gates.oz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- PHASE(*index: int, **vars: Any) None #
Apply PHASE gate with parameters on the circuit. See
tensorcircuit.gates.phase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- R(*index: int, **vars: Any) None #
Apply R gate with parameters on the circuit. See
tensorcircuit.gates.r_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RX(*index: int, **vars: Any) None #
Apply RX gate with parameters on the circuit. See
tensorcircuit.gates.rx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RXX(*index: int, **vars: Any) None #
Apply RXX gate with parameters on the circuit. See
tensorcircuit.gates.rxx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RY(*index: int, **vars: Any) None #
Apply RY gate with parameters on the circuit. See
tensorcircuit.gates.ry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RYY(*index: int, **vars: Any) None #
Apply RYY gate with parameters on the circuit. See
tensorcircuit.gates.ryy_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RZ(*index: int, **vars: Any) None #
Apply RZ gate with parameters on the circuit. See
tensorcircuit.gates.rz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- RZZ(*index: int, **vars: Any) None #
Apply RZZ gate with parameters on the circuit. See
tensorcircuit.gates.rzz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- S(*index: int, **kws: Any) None #
Apply S gate on the circuit. See
tensorcircuit.gates.s_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+1.j \end{bmatrix}\end{split}\]
- SD(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- SWAP(*index: int, **kws: Any) None #
Apply SWAP gate on the circuit. See
tensorcircuit.gates.swap_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- T(*index: int, **kws: Any) None #
Apply T gate on the circuit. See
tensorcircuit.gates.t_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677+0.70710677j \end{bmatrix}\end{split}\]
- TD(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- TOFFOLI(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- U(*index: int, **vars: Any) None #
Apply U gate with parameters on the circuit. See
tensorcircuit.gates.u_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- WROOT(*index: int, **kws: Any) None #
Apply WROOT gate on the circuit. See
tensorcircuit.gates.wroot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & -0.5 & -0.5j\\ 0.5 & -0.5j & 0.70710677+0.j \end{bmatrix}\end{split}\]
- X(*index: int, **kws: Any) None #
Apply X gate on the circuit. See
tensorcircuit.gates.x_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j\\ 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- Y(*index: int, **kws: Any) None #
Apply Y gate on the circuit. See
tensorcircuit.gates.y_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j\\ 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- Z(*index: int, **kws: Any) None #
Apply Z gate on the circuit. See
tensorcircuit.gates.z_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- __init__(nqubits: int, empty: bool = False, inputs: Optional[Any] = None, mps_inputs: Optional[tensorcircuit.quantum.QuOperator] = None, dminputs: Optional[Any] = None, mpo_dminputs: Optional[tensorcircuit.quantum.QuOperator] = None, split: Optional[Dict[str, Any]] = None) None #
The density matrix simulator based on tensornetwork engine.
- 参数
nqubits (int) -- Number of qubits
empty (bool, optional) -- if True, nothing initialized, only for internal use, defaults to False
inputs (Optional[Tensor], optional) -- the state input for the circuit, defaults to None
mps_inputs (Optional[QuOperator]) -- QuVector for a MPS like initial pure state.
dminputs (Optional[Tensor], optional) -- the density matrix input for the circuit, defaults to None
mpo_dminputs (Optional[QuOperator]) -- QuOperator for a MPO like initial density matrix.
split (Optional[Dict[str, Any]]) -- dict if two qubit gate is ready for split, including parameters for at least one of
max_singular_values
andmax_truncation_err
.
- static all_zero_nodes(n: int, d: int = 2, prefix: str = 'qb-') List[tensornetwork.network_components.Node] #
- amplitude(l: Union[str, Any]) Any #
Returns the amplitude of the circuit given the bitstring l. For state simulator, it computes \(\langle l\vert \psi\rangle\), for density matrix simulator, it computes \(Tr(\rho \vert l\rangle \langle 1\vert)\) Note how these two are different up to a square operation.
- Example
>>> c = tc.Circuit(2) >>> c.X(0) >>> c.amplitude("10") array(1.+0.j, dtype=complex64) >>> c.CNOT(0, 1) >>> c.amplitude("11") array(1.+0.j, dtype=complex64)
- 参数
l (Union[str, Tensor]) -- The bitstring of 0 and 1s.
- 返回
The amplitude of the circuit.
- 返回类型
tn.Node.tensor
- amplitudedamping(*index: int, **vars: float) None #
Apply amplitudedamping quantum channel on the circuit. See
tensorcircuit.channels.amplitudedampingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- any(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- append(c: tensorcircuit.abstractcircuit.AbstractCircuit, indices: Optional[List[int]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
append circuit
c
before- Example
>>> c1 = tc.Circuit(2) >>> c1.H(0) >>> c1.H(1) >>> c2 = tc.Circuit(2) >>> c2.cnot(0, 1) >>> c1.append(c2) <tensorcircuit.circuit.Circuit object at 0x7f8402968970> >>> c1.draw() ┌───┐ q_0:┤ H ├──■── ├───┤┌─┴─┐ q_1:┤ H ├┤ X ├ └───┘└───┘
- 参数
c (BaseCircuit) -- The other circuit to be appended
indices (Optional[List[int]], optional) -- the qubit indices to which
c
is appended on. Defaults to None, which means plain concatenation.
- 返回
The composed circuit
- 返回类型
- append_from_qir(qir: List[Dict[str, Any]]) None #
Apply the ciurict in form of quantum intermediate representation after the current cirucit.
- Example
>>> c = tc.Circuit(3) >>> c.H(0) >>> c.to_qir() [{'gatef': h, 'gate': Gate(...), 'index': (0,), 'name': 'h', 'split': None, 'mpo': False}] >>> c2 = tc.Circuit(3) >>> c2.CNOT(0, 1) >>> c2.to_qir() [{'gatef': cnot, 'gate': Gate(...), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}] >>> c.append_from_qir(c2.to_qir()) >>> c.to_qir() [{'gatef': h, 'gate': Gate(...), 'index': (0,), 'name': 'h', 'split': None, 'mpo': False}, {'gatef': cnot, 'gate': Gate(...), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}]
- 参数
qir (List[Dict[str, Any]]) -- The quantum intermediate representation.
- apply(gate: Union[tensorcircuit.gates.Gate, tensorcircuit.quantum.QuOperator], *index: int, name: Optional[str] = None, split: Optional[Dict[str, Any]] = None, mpo: bool = False, ir_dict: Optional[Dict[str, Any]] = None) None #
An implementation of this method should also append gate directionary to self._qir
- apply_general_gate(gate: Union[tensorcircuit.gates.Gate, tensorcircuit.quantum.QuOperator], *index: int, name: Optional[str] = None, split: Optional[Dict[str, Any]] = None, mpo: bool = False, ir_dict: Optional[Dict[str, Any]] = None) None #
An implementation of this method should also append gate directionary to self._qir
- static apply_general_gate_delayed(gatef: Callable[[], tensorcircuit.gates.Gate], name: Optional[str] = None, mpo: bool = False) Callable[[...], None] #
- apply_general_kraus(kraus: Sequence[tensorcircuit.gates.Gate], *index: int, **kws: Any) None [源代码]#
- static apply_general_kraus_delayed(krausf: Callable[[...], Sequence[tensorcircuit.gates.Gate]]) Callable[[...], None] [源代码]#
- static apply_general_variable_gate_delayed(gatef: Callable[[...], tensorcircuit.gates.Gate], name: Optional[str] = None, mpo: bool = False) Callable[[...], None] #
- barrier_instruction(*index: List[int]) None #
add a barrier instruction flag, no effect on numerical simulation
- 参数
index (List[int]) -- the corresponding qubits
- ccnot(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- ccx(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- static check_density_matrix(dm: Any) None #
- static check_kraus(kraus: Sequence[tensorcircuit.gates.Gate]) bool #
- circuit_param: Dict[str, Any]#
- cnot(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- static coloring_copied_nodes(nodes: Sequence[tensornetwork.network_components.Node], nodes0: Sequence[tensornetwork.network_components.Node], is_dagger: bool = True, flag: str = 'inputs') None #
- static coloring_nodes(nodes: Sequence[tensornetwork.network_components.Node], is_dagger: bool = False, flag: str = 'inputs') None #
- cond_measure(index: int, status: Optional[float] = None) Any #
Measurement on z basis at
index
qubit based on quantum amplitude (not post-selection). The highlight is that this method can return the measured result as a int Tensor and thus maintained a jittable pipeline.- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> r = c.cond_measurement(0) >>> c.conditional_gate(r, [tc.gates.i(), tc.gates.x()], 1) >>> c.expectation([tc.gates.z(), [0]]), c.expectation([tc.gates.z(), [1]]) # two possible outputs: (1, 1) or (-1, -1)
注解
In terms of
DMCircuit
, this method returns nothing and the density matrix after this method is kept in mixed state without knowing the measuremet resuslts- 参数
index (int) -- the qubit for the z-basis measurement
- 返回
0 or 1 for z measurement on up and down freedom
- 返回类型
Tensor
- cond_measurement(index: int, status: Optional[float] = None) Any #
Measurement on z basis at
index
qubit based on quantum amplitude (not post-selection). The highlight is that this method can return the measured result as a int Tensor and thus maintained a jittable pipeline.- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> r = c.cond_measurement(0) >>> c.conditional_gate(r, [tc.gates.i(), tc.gates.x()], 1) >>> c.expectation([tc.gates.z(), [0]]), c.expectation([tc.gates.z(), [1]]) # two possible outputs: (1, 1) or (-1, -1)
注解
In terms of
DMCircuit
, this method returns nothing and the density matrix after this method is kept in mixed state without knowing the measuremet resuslts- 参数
index (int) -- the qubit for the z-basis measurement
- 返回
0 or 1 for z measurement on up and down freedom
- 返回类型
Tensor
- conditional_gate(which: Any, kraus: Sequence[tensorcircuit.gates.Gate], *index: int) None #
Apply
which
-th gate fromkraus
list, i.e. apply kraus[which]- 参数
which (Tensor) -- Tensor of shape [] and dtype int
kraus (Sequence[Gate]) -- A list of gate in the form of
tc.gate
or Tensorindex (int) -- the qubit lines the gate applied on
- static copy_nodes(nodes: Sequence[tensornetwork.network_components.Node], dangling: Optional[Sequence[tensornetwork.network_components.Edge]] = None, conj: Optional[bool] = False) Tuple[List[tensornetwork.network_components.Node], List[tensornetwork.network_components.Edge]] #
copy all nodes and dangling edges correspondingly
- 返回
- cphase(*index: int, **vars: Any) None #
Apply CPHASE gate with parameters on the circuit. See
tensorcircuit.gates.cphase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cr(*index: int, **vars: Any) None #
Apply CR gate with parameters on the circuit. See
tensorcircuit.gates.cr_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- crx(*index: int, **vars: Any) None #
Apply CRX gate with parameters on the circuit. See
tensorcircuit.gates.crx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cry(*index: int, **vars: Any) None #
Apply CRY gate with parameters on the circuit. See
tensorcircuit.gates.cry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- crz(*index: int, **vars: Any) None #
Apply CRZ gate with parameters on the circuit. See
tensorcircuit.gates.crz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cswap(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- cu(*index: int, **vars: Any) None #
Apply CU gate with parameters on the circuit. See
tensorcircuit.gates.cu_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- cx(*index: int, **kws: Any) None #
Apply CNOT gate on the circuit. See
tensorcircuit.gates.cnot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- cy(*index: int, **kws: Any) None #
Apply CY gate on the circuit. See
tensorcircuit.gates.cy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.-1.j\\ 0.+0.j & 0.+0.j & 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- cz(*index: int, **kws: Any) None #
Apply CZ gate on the circuit. See
tensorcircuit.gates.cz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]
- densitymatrix(check: bool = False, reuse: bool = True) Any #
Return the output density matrix of the circuit.
- 参数
check (bool, optional) -- check whether the final return is a legal density matrix, defaults to False
reuse (bool, optional) -- whether to reuse previous results, defaults to True
- 返回
The output densitymatrix in 2D shape tensor form
- 返回类型
Tensor
- depolarizing(*index: int, **vars: float) None #
Apply depolarizing quantum channel on the circuit. See
tensorcircuit.channels.depolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- draw(**kws: Any) Any #
Visualise the circuit. This method recevies the keywords as same as qiskit.circuit.QuantumCircuit.draw. More details can be found here: https://qiskit.org/documentation/stubs/qiskit.circuit.QuantumCircuit.draw.html. Interesting kws options include: ``idle_wires``(bool)
- Example
>>> c = tc.Circuit(3) >>> c.H(1) >>> c.X(2) >>> c.CNOT(0, 1) >>> c.draw(output='text') q_0: ───────■── ┌───┐┌─┴─┐ q_1: ┤ H ├┤ X ├ ├───┤└───┘ q_2: ┤ X ├───── └───┘
- exp(*index: int, **vars: Any) None #
Apply EXP gate with parameters on the circuit. See
tensorcircuit.gates.exp_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- exp1(*index: int, **vars: Any) None #
Apply EXP1 gate with parameters on the circuit. See
tensorcircuit.gates.exp1_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- expectation(*ops: Tuple[tensornetwork.network_components.Node, List[int]], reuse: bool = True, noise_conf: Optional[Any] = None, status: Optional[Any] = None, **kws: Any) <property object at 0x7fc0b4f1ff90> #
Compute the expectation of corresponding operators.
- 参数
ops (Tuple[tn.Node, List[int]]) -- Operator and its position on the circuit, eg.
(tc.gates.z(), [1, ]), (tc.gates.x(), [2, ])
is for operator \(Z_1X_2\).reuse (bool) -- whether contract the density matrix in advance, defaults to True
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
status (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
Tensor with one element
- 返回类型
Tensor
- expectation_before(*ops: Tuple[tensornetwork.network_components.Node, List[int]], reuse: bool = True, **kws: Any) List[tensornetwork.network_components.Node] #
Get the tensor network in the form of a list of nodes for the expectation calculation before the real contraction
- 参数
reuse (bool, optional) -- _description_, defaults to True
- 引发
ValueError -- _description_
- 返回
_description_
- 返回类型
List[tn.Node]
- expectation_ps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, ps: Optional[Sequence[int]] = None, reuse: bool = True, noise_conf: Optional[Any] = None, nmc: int = 1000, status: Optional[Any] = None, **kws: Any) Any #
Shortcut for Pauli string expectation. x, y, z list are for X, Y, Z positions
- Example
>>> c = tc.Circuit(2) >>> c.X(0) >>> c.H(1) >>> c.expectation_ps(x=[1], z=[0]) array(-0.99999994+0.j, dtype=complex64)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> c.expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) (0.46274087-3.764033e-09j)
- 参数
x (Optional[Sequence[int]], optional) -- sites to apply X gate, defaults to None
y (Optional[Sequence[int]], optional) -- sites to apply Y gate, defaults to None
z (Optional[Sequence[int]], optional) -- sites to apply Z gate, defaults to None
ps (Optional[Sequence[int]], optional) -- or one can apply a ps structures instead of
x
,y
,z
, e.g. [0, 1, 3, 0, 2, 2] for X_1Z_2Y_4Y_5 defaults to None,ps
can overwritex
,y
andz
reuse (bool, optional) -- whether to cache and reuse the wavefunction, defaults to True
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
status (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
Expectation value
- 返回类型
Tensor
- fredkin(*index: int, **kws: Any) None #
Apply FREDKIN gate on the circuit. See
tensorcircuit.gates.fredkin_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- classmethod from_json(jsonstr: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
load json str as a Circuit
- 参数
jsonstr (str) -- _description_
circuit_params (Optional[Dict[str, Any]], optional) -- Extra circuit parameters in the format of
__init__
, defaults to None
- 返回
_description_
- 返回类型
- classmethod from_json_file(file: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
load json file and convert it to a circuit
- 参数
file (str) -- filename
circuit_params (Optional[Dict[str, Any]], optional) -- _description_, defaults to None
- 返回
_description_
- 返回类型
- classmethod from_openqasm(qasmstr: str, circuit_params: Optional[Dict[str, Any]] = None, keep_measure_order: bool = False) tensorcircuit.abstractcircuit.AbstractCircuit #
- classmethod from_openqasm_file(file: str, circuit_params: Optional[Dict[str, Any]] = None, keep_measure_order: bool = False) tensorcircuit.abstractcircuit.AbstractCircuit #
- classmethod from_qir(qir: List[Dict[str, Any]], circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
Restore the circuit from the quantum intermediate representation.
- Example
>>> c = tc.Circuit(3) >>> c.H(0) >>> c.rx(1, theta=tc.array_to_tensor(0.7)) >>> c.exp1(0, 1, unitary=tc.gates._zz_matrix, theta=tc.array_to_tensor(-0.2), split=split) >>> len(c) 7 >>> c.expectation((tc.gates.z(), [1])) array(0.764842+0.j, dtype=complex64) >>> qirs = c.to_qir() >>> >>> c = tc.Circuit.from_qir(qirs, circuit_params={"nqubits": 3}) >>> len(c._nodes) 7 >>> c.expectation((tc.gates.z(), [1])) array(0.764842+0.j, dtype=complex64)
- 参数
qir (List[Dict[str, Any]]) -- The quantum intermediate representation of a circuit.
circuit_params (Optional[Dict[str, Any]]) -- Extra circuit parameters.
- 返回
The circuit have same gates in the qir.
- 返回类型
- classmethod from_qiskit(qc: Any, n: Optional[int] = None, inputs: Optional[List[float]] = None, circuit_params: Optional[Dict[str, Any]] = None, binding_params: Optional[Union[Sequence[float], Dict[Any, float]]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
Import Qiskit QuantumCircuit object as a
tc.Circuit
object.- Example
>>> from qiskit import QuantumCircuit >>> qisc = QuantumCircuit(3) >>> qisc.h(2) >>> qisc.cswap(1, 2, 0) >>> qisc.swap(0, 1) >>> c = tc.Circuit.from_qiskit(qisc)
- 参数
qc (QuantumCircuit in Qiskit) -- Qiskit Circuit object
n (int) -- The number of qubits for the circuit
inputs (Optional[List[float]], optional) -- possible input wavefunction for
tc.Circuit
, defaults to Nonecircuit_params (Optional[Dict[str, Any]]) -- kwargs given in Circuit.__init__ construction function, default to None.
binding_params (Optional[Union[Sequence[float], Dict[Any, float]]]) -- (variational) parameters for the circuit. Could be either a sequence or dictionary depending on the type of parameters in the Qiskit circuit. For
ParameterVectorElement
use sequence. ForParameter
use dictionary
- 返回
The same circuit but as tensorcircuit object
- 返回类型
- classmethod from_qsim_file(file: str, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
- static front_from_nodes(nodes: List[tensornetwork.network_components.Node]) List[tensornetwork.network_components.Edge] #
- gate_aliases = [['cnot', 'cx'], ['fredkin', 'cswap'], ['toffoli', 'ccnot'], ['toffoli', 'ccx'], ['any', 'unitary'], ['sd', 'sdg'], ['td', 'tdg']]#
- gate_count(gate_list: Optional[Union[str, Sequence[str]]] = None) int #
count the gate number of the circuit
- Example
>>> c = tc.Circuit(3) >>> c.h(0) >>> c.multicontrol(0, 1, 2, ctrl=[0, 1], unitary=tc.gates._x_matrix) >>> c.toffolli(1, 2, 0) >>> c.gate_count() 3 >>> c.gate_count(["multicontrol", "toffoli"]) 2
- 参数
gate_list (Optional[Sequence[str]], optional) -- gate name or gate name list to be counted, defaults to None (counting all gates)
- 返回
the total number of all gates or gates in the
gate_list
- 返回类型
int
- gate_count_by_condition(cond_func: Callable[[Dict[str, Any]], bool]) int #
count the number of gates that satisfy certain condition
- Example
>>> c = tc.Circuit(3) >>> c.x(0) >>> c.h(0) >>> c.multicontrol(0, 1, 2, ctrl=[0, 1], unitary=tc.gates._x_matrix) >>> c.gate_count_by_condition(lambda qir: qir["index"] == (0, )) 2 >>> c.gate_count_by_condition(lambda qir: qir["mpo"]) 1
- 参数
cond_func (Callable[[Dict[str, Any]], bool]) -- the condition for counting the gate
- 返回
the total number of all gates which satisfy the
condition
- 返回类型
int
- gate_summary() Dict[str, int] #
return the summary dictionary on gate type - gate count pair
- 返回
the gate count dict by gate type
- 返回类型
Dict[str, int]
- general_kraus(kraus: Sequence[tensorcircuit.gates.Gate], *index: int, **kws: Any) None #
- generaldepolarizing(*index: int, **vars: float) None #
Apply generaldepolarizing quantum channel on the circuit. See
tensorcircuit.channels.generaldepolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- get_dm_as_quoperator() tensorcircuit.quantum.QuOperator #
Get the representation of the output state in the form of
QuOperator
while maintaining the circuit uncomputed- 返回
QuOperator
representation of the output state from the circuit- 返回类型
- get_dm_as_quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- get_positional_logical_mapping() Dict[int, int] #
Get positional logical mapping dict based on measure instruction. This function is useful when we only measure part of the qubits in the circuit, to process the count result from partial measurement, we must be aware of the mapping, i.e. for each position in the count bitstring, what is the corresponding qubits (logical) defined on the circuit
- 返回
positional_logical_mapping
- 返回类型
Dict[int, int]
- get_quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- h(*index: int, **kws: Any) None #
Apply H gate on the circuit. See
tensorcircuit.gates.h_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & 0.70710677+0.j\\ 0.70710677+0.j & -0.70710677+0.j \end{bmatrix}\end{split}\]
- i(*index: int, **kws: Any) None #
Apply I gate on the circuit. See
tensorcircuit.gates.i_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- initial_mapping(logical_physical_mapping: Dict[int, int], n: Optional[int] = None, circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
generate a new circuit with the qubit mapping given by
logical_physical_mapping
- 参数
logical_physical_mapping (Dict[int, int]) -- how to map logical qubits to the physical qubits on the new circuit
n (Optional[int], optional) -- number of qubit of the new circuit, can be different from the original one, defaults to None
circuit_params (Optional[Dict[str, Any]], optional) -- _description_, defaults to None
- 返回
_description_
- 返回类型
- inputs: Any#
- inverse(circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.abstractcircuit.AbstractCircuit #
inverse the circuit, return a new inversed circuit
- EXAMPLE
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rzz(1, 2, theta=0.8) >>> c1 = c.inverse()
- 参数
circuit_params (Optional[Dict[str, Any]], optional) -- keywords dict for initialization the new circuit, defaults to None
- 返回
the inversed circuit
- 返回类型
- is_dm: bool = True#
- is_mps: bool = False#
- isotropicdepolarizing(*index: int, **vars: float) None #
Apply isotropicdepolarizing quantum channel on the circuit. See
tensorcircuit.channels.isotropicdepolarizingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- iswap(*index: int, **vars: Any) None #
Apply ISWAP gate with parameters on the circuit. See
tensorcircuit.gates.iswap_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- measure(*index: int, with_prob: bool = False, status: Optional[Any] = None) Tuple[Any, Any] #
Take measurement to the given quantum lines. This method is jittable is and about 100 times faster than unjit version!
- 参数
index (int) -- Measure on which quantum line.
with_prob (bool, optional) -- If true, theoretical probability is also returned.
status (Optional[Tensor]) -- external randomness, with shape [index], defaults to None
- 返回
The sample output and probability (optional) of the quantum line.
- 返回类型
Tuple[Tensor, Tensor]
- measure_instruction(*index: int) None #
add a measurement instruction flag, no effect on numerical simulation
- 参数
index (int) -- the corresponding qubits
- measure_jit(*index: int, with_prob: bool = False, status: Optional[Any] = None) Tuple[Any, Any] #
Take measurement to the given quantum lines. This method is jittable is and about 100 times faster than unjit version!
- 参数
index (int) -- Measure on which quantum line.
with_prob (bool, optional) -- If true, theoretical probability is also returned.
status (Optional[Tensor]) -- external randomness, with shape [index], defaults to None
- 返回
The sample output and probability (optional) of the quantum line.
- 返回类型
Tuple[Tensor, Tensor]
- mpo(*index: int, **vars: Any) None #
Apply mpo gate in MPO format on the circuit. See
tensorcircuit.gates.mpo_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- mpogates = ['multicontrol', 'mpo']#
- multicontrol(*index: int, **vars: Any) None #
Apply multicontrol gate in MPO format on the circuit. See
tensorcircuit.gates.multicontrol_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- orx(*index: int, **vars: Any) None #
Apply ORX gate with parameters on the circuit. See
tensorcircuit.gates.orx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ory(*index: int, **vars: Any) None #
Apply ORY gate with parameters on the circuit. See
tensorcircuit.gates.ory_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- orz(*index: int, **vars: Any) None #
Apply ORZ gate with parameters on the circuit. See
tensorcircuit.gates.orz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ox(*index: int, **kws: Any) None #
Apply OX gate on the circuit. See
tensorcircuit.gates.ox_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- oy(*index: int, **kws: Any) None #
Apply OY gate on the circuit. See
tensorcircuit.gates.oy_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j & 0.+0.j & 0.+0.j\\ 0.+1.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- oz(*index: int, **kws: Any) None #
Apply OZ gate on the circuit. See
tensorcircuit.gates.oz_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- perfect_sampling(status: Optional[Any] = None) Tuple[str, float] #
Sampling bistrings from the circuit output based on quantum amplitudes. Reference: arXiv:1201.3974.
- 参数
status (Optional[Tensor]) -- external randomness, with shape [nqubits], defaults to None
- 返回
Sampled bit string and the corresponding theoretical probability.
- 返回类型
Tuple[str, float]
- phase(*index: int, **vars: Any) None #
Apply PHASE gate with parameters on the circuit. See
tensorcircuit.gates.phase_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- phasedamping(*index: int, **vars: float) None #
Apply phasedamping quantum channel on the circuit. See
tensorcircuit.channels.phasedampingchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- prepend(c: tensorcircuit.abstractcircuit.AbstractCircuit) tensorcircuit.abstractcircuit.AbstractCircuit #
prepend circuit
c
before- 参数
c (BaseCircuit) -- The other circuit to be prepended
- 返回
The composed circuit
- 返回类型
- probability() Any #
get the 2^n length probability vector over computational basis
- 返回
probability vector
- 返回类型
Tensor
- quvector() tensorcircuit.quantum.QuVector #
Get the representation of the output state in the form of
QuVector
while maintaining the circuit uncomputed- 返回
QuVector
representation of the output state from the circuit- 返回类型
- r(*index: int, **vars: Any) None #
Apply R gate with parameters on the circuit. See
tensorcircuit.gates.r_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- readouterror_bs(readout_error: Optional[Sequence[Any]] = None, p: Optional[Any] = None) Any #
Apply readout error to original probabilities of bit string and return the noisy probabilities.
- Example
>>> readout_error = [] >>> readout_error.append([0.9,0.75]) # readout error for qubit 0, [p0|0,p1|1] >>> readout_error.append([0.4,0.7]) # readout error for qubit 1, [p0|0,p1|1]
- 参数
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- list of readout error for each qubits.
p (Optional[Any]) -- probabilities of bit string
- 返回类型
Tensor
- replace_inputs(inputs: Any) None #
Replace the input state with the circuit structure unchanged.
- 参数
inputs (Tensor) -- Input wavefunction.
- reset(*index: int, **vars: float) None #
Apply reset quantum channel on the circuit. See
tensorcircuit.channels.resetchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- reset_instruction(*index: int) None #
add a reset instruction flag, no effect on numerical simulation
- 参数
index (int) -- the corresponding qubits
- rx(*index: int, **vars: Any) None #
Apply RX gate with parameters on the circuit. See
tensorcircuit.gates.rx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rxx(*index: int, **vars: Any) None #
Apply RXX gate with parameters on the circuit. See
tensorcircuit.gates.rxx_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ry(*index: int, **vars: Any) None #
Apply RY gate with parameters on the circuit. See
tensorcircuit.gates.ry_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- ryy(*index: int, **vars: Any) None #
Apply RYY gate with parameters on the circuit. See
tensorcircuit.gates.ryy_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rz(*index: int, **vars: Any) None #
Apply RZ gate with parameters on the circuit. See
tensorcircuit.gates.rz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- rzz(*index: int, **vars: Any) None #
Apply RZZ gate with parameters on the circuit. See
tensorcircuit.gates.rzz_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- s(*index: int, **kws: Any) None #
Apply S gate on the circuit. See
tensorcircuit.gates.s_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.+1.j \end{bmatrix}\end{split}\]
- sample(batch: Optional[int] = None, allow_state: bool = False, readout_error: Optional[Sequence[Any]] = None, format: Optional[str] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None) Any #
batched sampling from state or circuit tensor network directly
- 参数
batch (Optional[int], optional) -- number of samples, defaults to None
allow_state (bool, optional) -- if true, we sample from the final state if memory allows, True is preferred, defaults to False
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None
format (Optional[str]) -- sample format, defaults to None as backward compatibility check the doc in
tensorcircuit.quantum.measurement_results()
format -- alias for the argument
format
random_generator (Optional[Any], optional) -- random generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
- 返回
List (if batch) of tuple (binary configuration tensor and corresponding probability) if the format is None, and consistent with format when given
- 返回类型
Any
- sample_expectation_ps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, shots: Optional[int] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None, readout_error: Optional[Sequence[Any]] = None, noise_conf: Optional[Any] = None, nmc: int = 1000, statusc: Optional[Any] = None, **kws: Any) Any #
Compute the expectation with given Pauli string with measurement shots numbers
- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rx(1, theta=np.pi/2) >>> c.sample_expectation_ps(x=[0], y=[1]) -0.99999976 >>> readout_error = [] >>> readout_error.append([0.9,0.75]) >>> readout_error.append([0.4,0.7]) >>> c.sample_expectation_ps(x=[0], y=[1],readout_error = readout_error)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> readout_error = [[0.9, 0.75],[0.4, 0.7]] >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> noise_conf.add_noise("readout", readout_error) >>> c.sample_expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) 0.44766843
- 参数
x (Optional[Sequence[int]], optional) -- index for Pauli X, defaults to None
y (Optional[Sequence[int]], optional) -- index for Pauli Y, defaults to None
z (Optional[Sequence[int]], optional) -- index for Pauli Z, defaults to None
shots (Optional[int], optional) -- number of measurement shots, defaults to None, indicating analytical result
random_generator (Optional[Any]) -- random_generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None. Overrided if noise_conf is provided.
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
statusc (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
[description]
- 返回类型
Tensor
- sd(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- sdg(*index: int, **kws: Any) None #
Apply SD gate on the circuit. See
tensorcircuit.gates.sd_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & 0.-1.j \end{bmatrix}\end{split}\]
- select_gate(which: Any, kraus: Sequence[tensorcircuit.gates.Gate], *index: int) None #
Apply
which
-th gate fromkraus
list, i.e. apply kraus[which]- 参数
which (Tensor) -- Tensor of shape [] and dtype int
kraus (Sequence[Gate]) -- A list of gate in the form of
tc.gate
or Tensorindex (int) -- the qubit lines the gate applied on
- sexpps(x: Optional[Sequence[int]] = None, y: Optional[Sequence[int]] = None, z: Optional[Sequence[int]] = None, shots: Optional[int] = None, random_generator: Optional[Any] = None, status: Optional[Any] = None, readout_error: Optional[Sequence[Any]] = None, noise_conf: Optional[Any] = None, nmc: int = 1000, statusc: Optional[Any] = None, **kws: Any) Any #
Compute the expectation with given Pauli string with measurement shots numbers
- Example
>>> c = tc.Circuit(2) >>> c.H(0) >>> c.rx(1, theta=np.pi/2) >>> c.sample_expectation_ps(x=[0], y=[1]) -0.99999976 >>> readout_error = [] >>> readout_error.append([0.9,0.75]) >>> readout_error.append([0.4,0.7]) >>> c.sample_expectation_ps(x=[0], y=[1],readout_error = readout_error)
>>> c = tc.Circuit(2) >>> c.cnot(0, 1) >>> c.rx(0, theta=0.4) >>> c.rx(1, theta=0.8) >>> c.h(0) >>> c.h(1) >>> error1 = tc.channels.generaldepolarizingchannel(0.1, 1) >>> error2 = tc.channels.generaldepolarizingchannel(0.06, 2) >>> readout_error = [[0.9, 0.75],[0.4, 0.7]] >>> noise_conf = NoiseConf() >>> noise_conf.add_noise("rx", error1) >>> noise_conf.add_noise("cnot", [error2], [[0, 1]]) >>> noise_conf.add_noise("readout", readout_error) >>> c.sample_expectation_ps(x=[0], noise_conf=noise_conf, nmc=10000) 0.44766843
- 参数
x (Optional[Sequence[int]], optional) -- index for Pauli X, defaults to None
y (Optional[Sequence[int]], optional) -- index for Pauli Y, defaults to None
z (Optional[Sequence[int]], optional) -- index for Pauli Z, defaults to None
shots (Optional[int], optional) -- number of measurement shots, defaults to None, indicating analytical result
random_generator (Optional[Any]) -- random_generator, defaults to None
status (Optional[Tensor]) -- external randomness given by tensor uniformly from [0, 1], if set, can overwrite random_generator
readout_error (Optional[Sequence[Any]] Tensor, List, Tuple) -- readout_error, defaults to None. Overrided if noise_conf is provided.
noise_conf (Optional[NoiseConf], optional) -- Noise Configuration, defaults to None
nmc (int, optional) -- repetition time for Monte Carlo sampling for noisfy calculation, defaults to 1000
statusc (Optional[Tensor], optional) -- external randomness given by tensor uniformly from [0, 1], defaults to None, used for noisfy circuit sampling
- 返回
[description]
- 返回类型
Tensor
- sgates = ['i', 'x', 'y', 'z', 'h', 't', 's', 'td', 'sd', 'wroot', 'cnot', 'cz', 'swap', 'cy', 'ox', 'oy', 'oz', 'toffoli', 'fredkin']#
- split: Optional[Dict[str, Any]]#
- static standardize_gate(name: str) str #
standardize the gate name to tc common gate sets
- 参数
name (str) -- non-standard gate name
- 返回
the standard gate name
- 返回类型
str
- state(check: bool = False, reuse: bool = True) Any #
Return the output density matrix of the circuit.
- 参数
check (bool, optional) -- check whether the final return is a legal density matrix, defaults to False
reuse (bool, optional) -- whether to reuse previous results, defaults to True
- 返回
The output densitymatrix in 2D shape tensor form
- 返回类型
Tensor
- swap(*index: int, **kws: Any) None #
Apply SWAP gate on the circuit. See
tensorcircuit.gates.swap_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j \end{bmatrix}\end{split}\]
- t(*index: int, **kws: Any) None #
Apply T gate on the circuit. See
tensorcircuit.gates.t_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677+0.70710677j \end{bmatrix}\end{split}\]
- td(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- tdg(*index: int, **kws: Any) None #
Apply TD gate on the circuit. See
tensorcircuit.gates.td_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1. & +0.j & 0. & +0.j\\ 0. & +0.j & 0.70710677-0.70710677j \end{bmatrix}\end{split}\]
- tex(**kws: Any) str #
Generate latex string based on quantikz latex package
- 返回
Latex string that can be directly compiled via, e.g. latexit
- 返回类型
str
- thermalrelaxation(*index: int, **vars: float) None #
Apply thermalrelaxation quantum channel on the circuit. See
tensorcircuit.channels.thermalrelaxationchannel()
- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the channel.
- to_circuit(circuit_params: Optional[Dict[str, Any]] = None) tensorcircuit.circuit.Circuit #
convert into state simulator (current implementation ignores all noise channels)
- 参数
circuit_params (Optional[Dict[str, Any]], optional) -- kws to initialize circuit object, defaults to None
- 返回
Circuit with no noise
- 返回类型
- to_cirq(enable_instruction: bool = False) Any #
Translate
tc.Circuit
to a cirq circuit object.- 参数
enable_instruction (bool, defaults to False) -- whether also export measurement and reset instructions
- 返回
A cirq circuit of this circuit.
- to_graphviz(graph: Optional[graphviz.graphs.Graph] = None, include_all_names: bool = False, engine: str = 'neato') graphviz.graphs.Graph #
Not an ideal visualization for quantum circuit, but reserve here as a general approach to show the tensornetwork [Deprecated, use
Circuit.vis_tex
orCircuit.draw
instead]
- to_json(file: Optional[str] = None, simplified: bool = False) Any #
circuit dumps to json
- 参数
file (Optional[str], optional) -- file str to dump the json to, defaults to None, return the json str
simplified (bool) -- If False, keep all info for each gate, defaults to be False. If True, suitable for IO since less information is required
- 返回
None if dumps to file otherwise the json str
- 返回类型
Any
- to_openqasm(**kws: Any) str #
transform circuit to openqasm via qiskit circuit, see https://qiskit.org/documentation/stubs/qiskit.circuit.QuantumCircuit.qasm.html for usage on possible options for
kws
- 返回
circuit representation in openqasm format
- 返回类型
str
- to_qir() List[Dict[str, Any]] #
Return the quantum intermediate representation of the circuit.
- Example
>>> c = tc.Circuit(2) >>> c.CNOT(0, 1) >>> c.to_qir() [{'gatef': cnot, 'gate': Gate( name: 'cnot', tensor: array([[[[1.+0.j, 0.+0.j], [0.+0.j, 0.+0.j]], [[0.+0.j, 1.+0.j], [0.+0.j, 0.+0.j]]], [[[0.+0.j, 0.+0.j], [0.+0.j, 1.+0.j]], [[0.+0.j, 0.+0.j], [1.+0.j, 0.+0.j]]]], dtype=complex64), edges: [ Edge(Dangling Edge)[0], Edge(Dangling Edge)[1], Edge('cnot'[2] -> 'qb-1'[0] ), Edge('cnot'[3] -> 'qb-2'[0] ) ]), 'index': (0, 1), 'name': 'cnot', 'split': None, 'mpo': False}]
- 返回
The quantum intermediate representation of the circuit.
- 返回类型
List[Dict[str, Any]]
- to_qiskit(enable_instruction: bool = False, enable_inputs: bool = False) Any #
Translate
tc.Circuit
to a qiskit QuantumCircuit object.- 参数
enable_instruction (bool, defaults to False) -- whether also export measurement and reset instructions
enable_inputs (bool, defaults to False) -- whether also export the inputs
- 返回
A qiskit object of this circuit.
- toffoli(*index: int, **kws: Any) None #
Apply TOFFOLI gate on the circuit. See
tensorcircuit.gates.toffoli_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j & 0.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j\\ 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 0.+0.j & 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- u(*index: int, **vars: Any) None #
Apply U gate with parameters on the circuit. See
tensorcircuit.gates.u_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- unitary(*index: int, **vars: Any) None #
Apply ANY gate with parameters on the circuit. See
tensorcircuit.gates.any_gate()
.- 参数
index (int.) -- Qubit number that the gate applies on.
vars (float.) -- Parameters for the gate.
- vgates = ['r', 'cr', 'u', 'cu', 'rx', 'ry', 'rz', 'phase', 'rxx', 'ryy', 'rzz', 'cphase', 'crx', 'cry', 'crz', 'orx', 'ory', 'orz', 'iswap', 'any', 'exp', 'exp1']#
- vis_tex(**kws: Any) str #
Generate latex string based on quantikz latex package
- 返回
Latex string that can be directly compiled via, e.g. latexit
- 返回类型
str
- wavefunction() Any #
get the wavefunction of outputs, raise error if the final state is not purified [Experimental: the phase factor is not fixed for different backend]
- 返回
wavefunction vector
- 返回类型
Tensor
- wroot(*index: int, **kws: Any) None #
Apply WROOT gate on the circuit. See
tensorcircuit.gates.wroot_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.70710677+0.j & -0.5 & -0.5j\\ 0.5 & -0.5j & 0.70710677+0.j \end{bmatrix}\end{split}\]
- x(*index: int, **kws: Any) None #
Apply X gate on the circuit. See
tensorcircuit.gates.x_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 1.+0.j\\ 1.+0.j & 0.+0.j \end{bmatrix}\end{split}\]
- y(*index: int, **kws: Any) None #
Apply Y gate on the circuit. See
tensorcircuit.gates.y_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 0.+0.j & 0.-1.j\\ 0.+1.j & 0.+0.j \end{bmatrix}\end{split}\]
- z(*index: int, **kws: Any) None #
Apply Z gate on the circuit. See
tensorcircuit.gates.z_gate()
.- 参数
index (int.) --
Qubit number that the gate applies on. The matrix for the gate is
\[\begin{split}\begin{bmatrix} 1.+0.j & 0.+0.j\\ 0.+0.j & -1.+0.j \end{bmatrix}\end{split}\]